I've made like 3 attempts to paint the hood with the brush... and i must accept the fact that you can't use paintbrush (except you're a master of it) to paint big areas.
My last attempt was not that bad (it was a first layer very thin), but as i begin to have more kits on my stash, i will move on airbrush for those kind of jobs.
So, in the meantime, i have worked on the interior, panel doors (silver lining) and dashboard (decals+red needle). I have not so much details planned to do, gloss on tachometers, small black adjustements here and there, as i want to keep it simple for a first car. Seats, engine and suspension will be next!
ddddd
lundi 30 juin 2014
lundi 23 juin 2014
Mustang Part 14 - Pipes
Little update, mainly focused on exhaust pipes, first with aluminium, then weathering in blue and rust.
Gas tank done :
Chromes parts cleaned out, gas tank top painted in black as in the true bullit fashion :
Gas tank done :
Chromes parts cleaned out, gas tank top painted in black as in the true bullit fashion :
dimanche 15 juin 2014
Mustang Part 13 - Black painting
After the issue of my semi gloss black paint, i re-do the corresponding parts, then adding aluminium to the rear suspension.
I prepped the body, removing flash, seams lines and so on, and wet sanding it entirely with 1000 sand paper.
Chassis and interior is painted.
Painting the wheels :
I prepped the body, removing flash, seams lines and so on, and wet sanding it entirely with 1000 sand paper.
Chassis and interior is painted.
lundi 9 juin 2014
Mustang Part 12 - Paint
After having worked on the interior, i switched to paint getting some good results and issues. Coming back to the hobby after so many years, for now, i stick to brush painting despite that i know that the finish result will be much less better than airbrush. I prefer to go slowly and work on the basics.
Anyway, let's go on.
I find out that i had an issue with semi gloss black paint... very grainy result...
Well, i was using a very old revell enamel (more than 15 years old) which seems to be throw it away now. I sanded off the part and i have to get a new paint.
Trying to paint the hood, we can see the brush marks... I used a brand new brush, but I have really to improve myself for this. My plan is to wet sand with 1000, and 2000, have another coat, wet sand again, then clear coat.
Meanwhile, i'm testing the chassis/body integration. It seems to be ok, even if it's not really easy to put them together as designed originally by the kit.
Anyway, let's go on.
I find out that i had an issue with semi gloss black paint... very grainy result...
Well, i was using a very old revell enamel (more than 15 years old) which seems to be throw it away now. I sanded off the part and i have to get a new paint.
Trying to paint the hood, we can see the brush marks... I used a brand new brush, but I have really to improve myself for this. My plan is to wet sand with 1000, and 2000, have another coat, wet sand again, then clear coat.
Meanwhile, i'm testing the chassis/body integration. It seems to be ok, even if it's not really easy to put them together as designed originally by the kit.
vendredi 6 juin 2014
jeudi 29 mai 2014
Awing Part 16 - Masking
After a very looooonnnnnnggg time, i came back to the awing. I was not feeling the mood to work on it. I'm not very confortable with the paint part on this kit as i fear i won't be happy with the finish result.
Anyway, I painted the last light white coat and lightly sanding it on the areas where it will be white at the end.
Anyway, I painted the last light white coat and lightly sanding it on the areas where it will be white at the end.
Following step is to apply masking tape for the black red paint areas. It's not a color straight from the paint chart, so i will need to mix together red and black. It will force me to paint all the red areas in one sequence because it will be difficult to have the same mixing doses multiple times.
lundi 26 mai 2014
Mustang Part 10 - Various parts
Painting various parts in black :
Filling the pastille molds on the chassis.
Assembling the motors with chrome parts and fixing exhausts :
Beginning to work on the wheels :
While i was trying to see how seats are fitting with the interior, i saw that the original position of the seat would have not be correct. It needed to be put back a little.
Filling the pastille molds on the chassis.
Beginning to work on the wheels :
Inscription à :
Articles (Atom)